Call Us For A Free Estimate
941.493.4001
Serving Sarasota, Manatee, and Charlotte Counties
 Florida State Lic. # CRC1326741

Commercial

COMMERCIAL OPERATORS


Trolley Operators Trolley Operators
Trolley operators are typically used for standard lift sectional doors, and are available in light, medium, and industrial-duty. 
Jackshaft Operators Jackshaft Operaotrs
Jackshaft operators are designed for use on rolling grilles and shutters, as well as rolling doors. Some operators are also designed for use on industrial sectional doors with high or vertical lift.
Slide Operators Slide Operators
Sliding door operators are designed for use on single and bi-parting slide doors and fire doors.
High Cycle Trolley Operators High Cycle 
Trolley
Operators

High cycle trolley operators are designed for use on high-traffic doors and low-profile applications. 
Hoist Operators Hoist Operators
Hoist operators are designed for use on rolling doors and grilles, as well as industrial sectional doors with high or vertical lift.
GATE OPERATORS





Slide Gate Operators
Slide Gate Operators
Slide operators are used when there is limited space behind a secured facility, so the gate must run parallel to a fence or wall.
Swing Gate Operators
Swing Gate Operators
Swing operators are used when a gate (or two gates) open inward or outward away from a wall. 
Barrier Gate Operators
Barrier Gate Operators
Barrier operators are used for high-traffic, frequently accessed sites, such as airports, parking lots, or office buildings.
High Cycle Trolley Gate Operators
High Cycle Trolley Gate Operators
High cycle trolley operators are designed for use on high-traffic gates and low-profile applications.
Gate Operator Accessories
Gate Operator Accessories
Chamberlain® gate operator accessories are designed to fit all applications. We offer gate hardware, pedestals, loops and loop detectors, vehicle detection systems, gate locks, fire access boxes, and more.
Builders Specialties offers a wide variety of commercial doors from Clopays arsenal along with its residential offerings. We can provide from the basic ribbed steel sectional doors to fully embossed insulated sectional doors, to roll up doors and everything in between. 

We also offer a wide range of options for your gate operator needs. No matter if you have a sliding gate, or a swing gate or multiple gates at your home or business, we can work with you to make sure we get them open when you need them too. Find the links to the right to view your options for gate operators.

Within this page you will find all the information that you should need to narrow your selection from the sectional overhead doors that we carry. If you are in the need of a roll up style commercial door please contact us and we can discuss your needs and discuss your options for these tyoe doors. Please have the following information available when contacting us:  
The door opening size, Height and width
The head room (The space from the top opening of the door to the ceiling)
The mounting type, what is the door mounting to, concrete block? Steel beam? wood jambs?
How much side room do you have? from the side opening to the adjacent wall or any obstruction.


UNINSULATED DOORS

Premium-duty 20 gauge and heavy-duty 24 gauge steel non-insulated garage doors offer long-lasting dependability and enduring quality that will meet the rigors of daily use.

25 gauge non-insulated steel doors are an alternative option for applications requiring economy and reliability in a lighter- gauge commercial garage door.



525 2" thick, 25 gauge ribbed steel door
254 2" thick, 24 gauge ribbed steel door
692 2 1/8" thick, 24 gauge raised panel steel door
520 2" thick, 20 gauge ribbed steel door

Break-Away Bottom Section

A break-away bottom section is an important safety feature for commercial doors installed in high-traffic loading areas. If the door is accidentally struck by a forklift or another piece of heavy equipment, the section gives way and can be reset in seconds, eliminating downtime and costly repair calls, as well as reducing the risk of operator injury and structural damage to the building. Learn more

Features - 520/524/525

Panel Design: 2" thick roll formed ribbed steel

 

 

Steel Gauge: 20 ga  (.034" min) - Model 520, 24 ga (.022" min)  - Model 524  and 25 ga (.019 min) - Model 525 ribbed steel sections
Joint Design: Tongue and groove
Thickness/Insulation: No insulation
Hardware: 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs 
Colors: Pre-painted white or brown (520/525)
Pre-painted white, brown, tan or gray (524)
Limited Warranty: 10-year finish against rust  / one-year material & workmanship

INSULATED DOORS


Polyurethane

Climate control, reliability, durability-- our premier polyurethane insulated steel garage doors have it all, providing excellent temperature control, energy efficiency and long-lasting service for a wide range of applications, such as firehouses, warehouses, and municipal buildings.

3715  1 3/8" thick, stucco embossed 27 gauge steel exterior with light ribbed pattern.
3717

1 3/4" thick, stucco embossed 27 gauge steel exterior with light ribbed pattern.

3718  1 3/4" thick, stucco embossed 27 gauge steel exterior with flush pattern.
3720  2" thick, stucco embossed 27 gauge steel exterior with light ribbed pattern.
3722  2" thick, stucco embossed 20 gauge steel exterior with flush pattern.

 

Features - 3715

Panel Design: 1 3/8" thick roll formed stucco embossed steel
Steel Gauge: 27 gauge (.016" min) exterior; 27 gauge (.016" min) interior
Joint Design: Tongue & groove section with continuous foam thermal break
Termal Conductivity: R-value 12.9*
Hardware: 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted snow mist white or commercial brown, C-tan and gray
Limited Warranty: 10-year paint / 10-year delamination / one-year material & workmanship

Features - 3717 and 3718
Panel Design:

(3717) 1 3/4" thick stucco embossed steel exterior with  minor ribbed pattern

(3718) 1 3/4" thick stucco embossed flush steel exterior

Steel Gauge: 27 gauge (.016" min) exterior; 27 gauge (.016" min) interior
Joint Design: Tongue & groove section with continuous foam thermal break
Termal Conductivity: R-value 15.05*
Hardware: 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted snow mist white, commercial brown, tan or grey. Optional Trinar white.
Limited Warranty: 10-year paint / 10-year delamination / one-year material & workmanship

Features - 3720 and 3722
Panel Design:

(3720) 2" thick stucco embossed steel exterior with  minor ribbed pattern

(3722) 2" thick stucco embossed flush steel exterior

Steel Gauge: 27 gauge (.016" min) exterior; 27 gauge (.016" min) interior (3720).
20 gauge (.034" min) exterior; 27 gauge (.016" min) interior (3722)
Joint Design: Tongue & groove section with continuous foam thermal break
Termal Conductivity: R-value 17.2*
Hardware: 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted snow mist white, commercial brown
Limited Warranty: 10-year paint / 10-year delamination / one-year material & workmanship

*Calculated door section R-value is in accordance with DASMA TDS-163.

POLYSTYRENE

These high quality, polystyrene insulated steel garage doors provide energy efficiency and reliable service under demanding conditions, making them ideal for use in municipal buildings, warehouses and shipping dock applications, or wherever value and energy efficiency is needed.


3150 1-3/8" insulated thermally broken door, stucco embossed steel with light ribbed pattern
3154 1-3/8" insulated raised panel woodgrain embossed door
3155 1-3/8" insulated flush panel woodgrain embossed door
3200 2" insulated thermally broken door, stucco embossed steel 
with light ribbed pattern (24 gauge)
3201 2" insulated thermally broken door, flush panel, woodgrain embossed steel (24 gauge)
3203 2" insulated thermally broken door, raised panel woodgrain embossed steel (24 gauge)
3220 2" insulated thermally broken door, stucco embossed steel with light ribbed pattern (20 gauge)
3300 3" Insulated thermally broken door, stucco embossed steel with light ribbed pattern (25 gauge)
Featues - 3300
Panel Design: 3" thick roll formed stucco embossed steel with light ribbed pattern
Steel Gauge: 25 gauge (.019" min) exterior; 27 gauge (.016" min) interior
Joint Design: Tongue & groove sectional joint with silicone filled thermal break
Termal Conductivity: R-Value 12.15*
Hardware: 14 gauge hinges, commercial 10 ball-steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted white or brown
Limited Warranty: 10-year paint/ 5-year delamination / one-year material & workmanship
Features - 3200, 3201, 3203 and 3220
Panel Design:

2" thick stucco embossed steel with light ribbed pattern (3200 & 3220)

2" thick flush woodgrain embossed steel (3201)              

2" thick raised panel woodgrain embossed steel (3203)

Steel Gauge:

24 gauge (.22" min) exterior; 27 gauge (.016" min) interior (3200, 3201, 3203)

20 gauge (.034" min) exterior, 27 gauge (.016" min) interior (3220)

Joint Design: Tongue & groove section joint with silicone filled thermal break
Termal Conductivity: R-value 9.1*
Hardware: 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cylcle torsion springs
Colors: Pre-painted white, brown, tan or gray (3200)  
Pre-painted white or brown (3220)
Pre-painted white, brown or almond (3201, 3203)
Trinar white (3200, 3201, 3203)
Trinar beige (3201, 3203)
Limited Warranty: 10-year paint/ 10-year delamination /one-year material & workmanship

Features - 3250, 3254, and 3255
Panel Design: 1-3/8" thick stucco embossed steel with light ribbed pattern (3150)
1-3/8" thick rasied woodgrain embossed steel (3154)
1-3/8" thick flush woodgrain embossed steel (3155)
Steel Gauge: 27 gauge (.016" min) exterior; 27 gauge (.016" min) interior
Joint Design: Tongue & groove section joint with silicone filled thermal break
Termal Conductivity: R-value 5.6*
Hardware: 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cylcle torsion springs
Colors: Pre-painted white, brown, commerical tan & gray (3150)
Pre-painted white, brown, almond & sandtone (3154, 3155)
Limited Warranty: 10-year paint/ 10-year delamination / one-year material & workmanship


*Calculated door section R-value is in accordance with DASMA TDS-163.

ECONOMY

Premium-duty 20 gauge and heavy-duty 24 gauge steel insulated garage doors offer long-lasting dependability and quality to meet the rigors of daily use in most commercial and industrial applications.

25 gauge insulated steel garage doors are an alternative option for applications requiring economy and reliability in a lighter-gauge commercial garage door.

525V

525S

2" thick, 25 gauge roll formed steel with 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (525V) or pre-painted 30 gauge steel backcover (525S)
524V
524S
2" thick, 24 gauge roll formed steel with 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (524V) or pre-painted 30 gauge steel backcover (524S)
520S 2" thick, 20 gauge roll formed steel with 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover (520S)
652V 2-1/8" thick, 24 gauge raised panel woodgrain embossed panel with 1-3/8" polystyrene insulation with polyethylene vinyl backcover

Features - 525V/525S

Panel Design: 2" thick roll formed smooth steel
Steel Gauge: 25 gauge (.019" min) ribbed steel sections
Joint Design: Tongue and groove
Thickness /Insulation

1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (525V)

1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover (525S)

Thermal Conductivity R-Value 6.6*
Hardware 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cycle torsion springs
Colors Pre-painted white or brown
Limited Warranty: 10-year paint / one-year material & workmanship

Features - 524V/524S

Panel Design: 2" thick roll formed stucco embossed steel
Steel Gauge: 24 gauge (.022" min) ribbed steel sections
Joint Design: Tongue and groove
Thickness /Insulation

1-3/8" thick polystyrene insulation with polyethylene vinyl backcover (524V)

1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover (524S)

Thermal Conductivity R-Value 6.6*
Hardware 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cylcle torsion springs
Colors Pre-painted white, brown, tan or gray
Limited Warranty: 10-year paint /one-year material & workmanship

Features - 520S

Panel Design: 2" thick roll formed stucco embossed steel
Steel Gauge: 20 gauge (.034" min) ribbed steel sections
Joint Design: Tongue and groove
Thickness /Insulation 1-3/8" thick polystyrene insulation with pre-painted 30 gauge steel backcover
Thermal Conductivity R-Value 6.6*
Hardware 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cylcle torsion springs
Colors Pre-painted white or brown
Limited Warranty: 10-year paint / one-year material & workmanship

Features - 652V

Panel Design: 2-1/8" thick woodgrain embossed raised panel steel
Steel Gauge: 24 gauge (.022" min) ribbed steel sections
Joint Design: Shiplap
Thickness /Insulation 1-3/8" thick polystyrene insulation with polyethylene vinyl backcover
Thermal Conductivity R-Value 6.96*
Hardware 14 gauge hinges, commercial 10 ball steel rollers, 10,000 cylcle torsion springs
Colors Pre-painted white, brown, almond or sandtone; Trinar white or beige
Limited Warranty: 10-year paint / one-year material & workmanship

*Calculated door section R-value is in accordance with DASMA TDS-163.

ALUMINUM DOORS

The perfect choice for architectural applications that require bright light, open visibility and a modern, industrial feel, Model 902 Full-View aluminum and glass garage doors can be used as a standard exterior garage door, as an interior "partition" or even as a versatile patio door to seamlessly merge indoor and outdoor spaces. 

Well-suited for restaurants, service stations, car dealerships, fire stations and trendy commercial retail and office spaces with a distinct architectural appearance.

902  2-1/8" thick, Full-View aluminum and glass garage doors with over 60 different glazing options.

 

Features:

Panel Design: Recessed aluminum panel
Gauge: 0.75" thick extrusions .050" aluminum panels
Joint Design: Tongue & groove
Thickness: 2-1/8"
Hardware: 14 gauge hinges, commercial 10-ball steel rollers, 10,000 cycle torsion springs
Colors: Clear, bronze, black, anodized, white, commerical brown
Limited Warranty: 5-year finish/1-year material & workmanship


GLAZING MATERIAL:

902D: 1/8" DSB Glass
902I: 1/2" Insulated Glass
902M: 1/4" Wire Glass
902P: 1/8" Clear Acrylic Plexi Glass
902T:

1/8" Clear Tempered Glass

Website Builder